Enter"12345678" as the default password. Click on "Password" and enter your new
password.
Press the
[GREEN]
key to confirm.
Exit the “Engineering menu” by pressing the
[RED]
key.
What if the card reader displays a
Comms Error
" message?
This error message means that the e355 card reader could not connect to the
WiFi. Verify your WiFi
settings and reset them, if necessary. If this does not resolve the error,
restart the card reader.
How can I verify that the card reader is reachable within the network?
Open a command line and run
telnet
<ip> <port>
. If the device is reachable, it will
connect and show "Device powered on".